2026 Men's Ride MTNPIG Snowboard - RD251028

Product Features

Designed for high-speed turns and the most aggressive of the Pig series boards, the MTNPIG features split tail tech that allows for a more dynamic turn shape and board flex through turns.

Ride the MTNPIG in your standard board length—unlike the rest of the Pig series, we don't suggest sizing down on this model.

The half-moon split tail shape helps it sink in deep snow while providing a long effective edge, increasing overall edge hold for sketchy situations.

Tapered Linear Quadratic sidecut allows for smooth turn initiation and powerful support through the turn without losing grip.

Carbon Slim Walls reduce weight, increase damping, increase energy transfer to enhance response and stability while Carbon-Infused Glass provides extra pop.

The MTNPIG is running wild and fast through the mountains, growing fat on powder, and should only be approached by an advanced rider.

Binding Compatibility

• Stainless Steel 2 x 4 Inserts

Terrain

• All Mountain, Powder

Rider's ability

• Intermediate / Expert

Rocker Type

• Tapered Directional Extra Camber- Directional positive camber dominant shape with rocker just in the nose.

• Designed to be ridden in one direction. More nose than tail, set back stance, and a sidecut to match.

• Can you still ride it switch? Yeah, of course. Is it going to be as good riding switch all day long? Probably not.

Rocker Profile

• ( Rocker / Camber )

Flex

• Medium / Stiff
• Directional

Flex Rating

• 7 out of 10 (1 Soft - 10 Stiff)

Taper

• 0

Core

Performance Core

• High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light.

Laminates

STANDARD TOP SHEET

• Durable Urethane top sheet material with graphics only RIDE can bring you.

Carbon Infused Glass Fiberglass

• 90° Carbon fibers stitched into the glass. Extra pop and response, without adding extra stiffness.

CARBON ARRAY 5 LAMINATES

• This power distribution technology provides total board control in every stance location.
• Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles.
• Rider input is then channeled to the opposing contact point for maximum board control.
• Offered in two levels of technology, 3 and 5.

Double IMPACT PLATES LAMINATES

• Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, Single and Double.

Base

Sintered, Stone Ground Race Base

• LOW FRICTION
• The highest grade carbon-infused sintered base material available. Designed for speed.

Edges

Linear Quadratic Sidecut

• A directional sidecut utilizing Quadratic curvature from the tip to the rear insert pack, then progressing into a linear section into the tail.
• This creates smooth catch-free turn initiation and powerful support through the turn exit without losing grip.

Carbon Slim Walls

• RIDE's Slim Wall technology is the evolution of our Roll-in Construction to its extreme limit.
• By creating a fully 3-D composite structure over Slimewall material, this revolutionary technology results in more efficient energy transfer, lighter weight construction, and even better damping.
• Further improving on Ride's revolutionary Slim Wall technology, Carbon Slim Wall integrates a full-length Carbon-Urethane, composite laminate, that provides additional edge hold and energy transfer over standard Slim Wall.

CLEAVE EDGE STEEL

• Nearly 50% more steel, delivers unmatched resistance to edge cracking and can be detuned to larger radii.

Additional Features

RIDE SNOWBOARD TECHNOLOGY

• Engineered by snowboarders, for the most demanding riders on the planet.
• With over 30 years of experience in building high-quality products.

Bio Resin

• Ride's plant based Bio Resin is one of the biggest impacts for sustainability.
• By using a Bio based resin instead of a traditional epoxy to assemble boards, we’re able to drastically reduce our carbon emissions while using less toxic chemicals.
• Win-win for everyone.

Factory Tuned

• Board comes waxed and ready for the mountain right from the factory.

Split Tail Shaping

• Split Tail technology allows for more dynamic turn shape and board flex, creating a unique ride in powder and hard pack.

Warranty

RIDE provides a 3-year warranty on snowboards.

• RIDE warranties are reserved for the original purchaser only.
• Make sure to keep a copy of your original purchase receipt or invoice (Proof of Purchase), in the unlikely event that you need warranty service.
• If the original Proof of Purchase cannot be provided on a warranty return, RIDE will use the manufacturing date as the start of the warranty period.