Get This Kit...

2025 Men's Burton Swath BOA Snowboard Boots - 203181

Product Features

Lightweight, Mid-Flexing Freestyle Fun

The men's Burton Swath BOA® Snowboard Boots combine a locked in fit with a medium-flexing freestyle feel for chasing down side hits and natural features across the mountain.

Their lightweight build keeps you light on your feet, while effortless tensioning lets you fine tune the feel from upper to lower to match your ambitions.

Supportive and Responsive

Plenty of support and responsive feel give you that extra edge to go for it.

Micro-Adjustable Fit

A Dual-Zone BOA® Fit System lets you independently micro-adjust the fit and feel of the forefoot and upper boot to exactly how you want it.

Secure, Comfortable Fit

Warm, Dry Feet

Lightweight, heat-moldable liners offer a custom fit with the tech to reflect heat and wick sweat to keep your feet warm and dry all day, all season.

Features:

LACING:

Dual Zone Boa®

• Boa Coiler Closure System Powered by Burton Exclusive New England Ropes
• New England Ropes use American-made fibers and are virtually indestructible, won't kink, and are easy to re-lace
• features two distinct lace zones that can be independently adjusted with the twist of a dial for a custom fit in both the upper and lower portions of the boot.

LINER:

Imprint™ 3 with Focus Cuff

• heat-moldable liner provides moisture management and added wicking control and features a hook-and-loop closure system for a snug fit and lightweight power panels for elevated response and support.
• Boosting heel-hold by hugging that sweet spot around your ankle, the Focus Cuff rides slightly higher on your ankle for increased response.

CUSHIONING

DynoBITE with Sleeping Bag Reflective Foil

• In addition to ReBounce, which wraps the cushioning in heat-reflective foil to keep it cushy and effective in cold weather, the DynoBITE outsole features strategically placed rubber patches for extra traction and durability at the forefoot and heel.
• Like every Burton Dyno outsole, DynoBITE provides lightweight, durable cushioning that’s formulated specifically for snowboarding.
• 10-15% recycled rubber content depending on model treads lighter on the planet, too.

Lightweight Feel

• Ultraweave shell material eliminates bulky seams, creating a lightweight, durable, and seamless shell.

EST 0mm Heel Rise

• EST goes beyond bindings by drawing inspiration from the surf / skate heritage of snowboarding and giving you a more direct connection to your boards.
• By eliminating the ramp angle of your outsole, EST Lowers your center of gravity, improves board feel, and creates a more surf/skate like feel.
• All without sacrificing an ounce of cushioning thanks to ultra dampening ReBounce and B3 Gel inserts.

FLEX AND RESPONSE:

Medium Flex

• 1:1 firm flex PowerUp tongue creates a snug fit between boot and tongue, eliminating the need to readjust while you ride
• GripLITE backstay snugs up the fit between the boot and hi-back for direct energy transfer and reduced rider fatigue

Articulating Cuff

• Allowing the upper and lower zones of the boot to flex independently creates fuild forward motion, minimizes shell distortion, and maximizes mobility.

COMFORT:

Total Comfort Construction

• Construction to ensure your boot feels right immediately, with no need to break them in.

Shrinkage Footprint Reduction Technology

• reduces the boot's overall footprint, minimizing toe drag

Snow-Proof Internal Gusset

• completely seals the lower zone of the boot, keeping your feet warm and dry

Level 3 Molded EVA Footbed

Riding Level

Intermediate-Advanced

Warranty:

1-YEAR WARRANTY

Pros of BOA® Lacing

• It is easy to fine-tune tightness with micro-adjustments
• Pop out the coiler for quick and easy comfort on the lift or during après
• All boot adjustments can be made while wearing gloves/mittens
• A single-coiler system tightens and loosens evenly across the entire foot

Cons of BOA® Lacing

• The coiler interface may take a couple of uses before it feels intuitive
• It can be easy to over-tighten with BOA® and cause foot fatigue
• A single-coiler system does not allow for independent tightness of the upper and lower zones
• The BOA® coiler sticks off the boot and can get caught on things
• Replacing a broken coiler or cable requires additional parts and can be complicated
• BOA® lacing snowboard boots are generally more expensive

TNT Cable Lock
Burton Part Number: 108021

Houdini-proof.

Additional Features:

• Pocket-Friendly, Compact Shape
• Compact 30" [76CM] Steel Cable Lock
• Three-Number Combination

 

TNT All-Season Fast Wax
Burton Part Number: 108101

Go fast in all conditions.

Additional Features:

• All-Purpose Wax for Most Days
• 100% Biodegradable Hydrocarbon All Temp Wax
• All Temp / Condition Formulation: 32°F to 14°F [0°C to -10°C]
• Apply with Iron Set to Medium Heat, Scrape, Brush (Optional) and Go
• 80 Grams
• Made in the USA

 

Pocket size Side edge and Base edge Sharpener in one tool. File side edge 88 and 89 degrees, and base edge 0.5 and 1 degrees.

 

TORQUE DRIVER

FEATURES:

6 piece ratchet driver #2 and #3 phillips #3 pozidrive 3/32" hex 1/4" flat head 8mm and 10mm wrench Sold in 6 packs

Save: up to 20% Off!

Burton Men's Genesis Re:Flex Snowboard Bindings - 105471

Product Details:

High Performance, Full Comfort

Supercharge your suspension for a responsive ride with the men's Burton Genesis Re:Flex Snowboard Bindings.

A little softer than our stiffest bindings and loaded with cushioning, the Genesis is made for full days on the mountain where comfort is key.

They offer a boot-hugging fit and reduced vibration for riders that push their gear and their riding.

They've got the full cushioning to match for less fatigue and more riding. Available in two models, mount the EST® version to a board with The Channel® for ultimate flex, feel, and adjustability, or go with Re:Flex and choose any board in the shop.

Riding Level

Intermediate - Expert

Mounting:

Re:Flex™

Re:Flex mounting system dramatically improves board flex and feel while also reducing weight and is compatible with all board mounting options.

Universal Compatibility

Re:Flex baseplates are universally compatible with all major mounting systems.

Universally compatible with all current snowboard mounting systems, including 4x4, 3D®, and The Channel®

Cushioned Comfort

FullBED 

cushioning system provides full underfoot cushioning, maximizing comfort while minimizing fatigue, and features a trap door design for easy-access to mounting hardware

Durable, All-Conditions Cushioning 

B3 gel cushioning maintains comfort and dampening through a wide range of temps and long term use.

Hi-Back:

Kickback Hammock

Hi-back is a combination of internal spring tension between the molded hammock and the hi-back frame for increased response and reduced vibration and comfort. 

Our standard hi-back provides consistent flex and features durable bomb-proof materials and foam padding for elevated comfort.

Nylon composite material blended with 30% short-glass provides playful response Increased Response Kickback Hammock hi-back suspends your heel for increased response and reduced vibration.

DialFLAD™

DialFLAD system with Living Hinge features a rotating dial for making adjustments to the forward lean angle of the hi-back based on the preference of the user, getting an active and quicker response with more forward lean and a more relaxed response with less forward lean.

Adjustable Lean

DialFLAD system lets you adjust the forward lean angle of the hi-back with the turn of dial.

Fully Adjustable Hi-Back

Living Hinge Hi-Back reduces hardware and weight, allowing for independent adjustment of your forward lean and hi-back rotation.

Single-component canted hi-back construction provides immediate response and allows you to manipulate the overall flex profile of the board;

Zero forward lean hi-back is completely vertical and designed for riders who prefer a more playful and relaxed feel

Baseplate Materials

30% Short-Glass/Nylon Composite

Buckles:

Double Take Buckles

feature dual-sided tongue teeth to help support quicker engagement and provide faster tongue uptake so it takes fewer cranks to tighten your straps, vastly improving strength, speed, and ease-of-use..

feature aluminum levers and a steel base for strength with a polycarbonate barrel for improved ratchet tongue life

Quick to Adjust Double Take Buckles 

take fewer cranks to tighten your straps and offer long-term durability.

Straps:

Supergrip Capstrap™ 2.0 toe strap

wraps over the toebox of the boot and is fully injected to reduce waste

Hammockstrap 2.0 ankle strap 

as a minimized construction that is ultra responsive, conforming to any boot;

Warranty:

1-YEAR WARRANTY

All Burton binding baseplates are backed by a LIFETIME WARRANTY and Burton straps and hi-backs are backed by a one-year warranty from date of purchase.

Please note the 3D Hinge Disc (not included) is needed for mounting on 3D systems.

3D pattern systems are found on Burton boards manufactured prior to 2014.

Dry N' Warm Ski Boot Heaters /

Dry out your soggy boots for tomorrow's bluebird day. The Happy Feet Dry n' Warm Boot Dryer and Warmer will dry your boots out overnight and make 'em toasty-warm so they're a pleasure to put on. Ski, snowboard, nordic, wetsuit booties, waders, or just cold, wet boots or shoes -- they'll warm up in under an hour, or dry overnight. The Dry-n-warm system uses convective heat to thoroughly dry and warm (hence the name) from the inside out -- safely.

Features / Tech:

• AC 110 volts -- plugs into any wall outlet
• No moving parts
• Convective heat dries without risk of heat damage
• Dries in a few hours, warms in a few minutes.

Sidas Winter 3Feet Merino Footbed (High)

Anatomical insoles adapted high-arched foot. Ideal hybrid top cover : synthetics fibers (40%) will guarantee resistance and durability, the merino wool (60%) will reduce odor and assure an optimal thermoregulation.

• Hybrid Merino top cover: Thermoregulation & Absorbs odors
• Eva shell high arch shape: foot support & pressure distribution
• Aluminum layer: Insulation
• EVA PAD: Heel cushioning

Save: 20% Off!

Burton Multipath 90L Large Duffel Bag - 205701

From road trips to month-long vacations, the Burton Multipath 90L Large Duffel Bag easily moves a mountain of gear. Comfort and convenience blend with durable road-ready materials to make this your trusty go-to for big trips by land, sea, or air. The handle converts to padded backpack straps for easy hauling. A removable sternum strap works with compression side straps to help secure the load. Down below, a water-resistant, tarp-lined bottom protects the interior from dirt and terminal grime.

Features:

• Dimensions: 28in x 14in x 13in / 72cm x 36cm x 34cm; Weight: 3.3lbs; Volume: 90L
• Durable outer fabric construction repels water in snow and wintry-mix conditions
• Three-quarter opening for easy access and packing
• Ergonomic padded convertible shoulder straps and haul handle with an adjustable sternum strap
• Side compression straps
• External tarp-lined shoe and laundry pockets; External zippered accessory pocket
• bluesign® materials are responsibly crafted in processes that minimize impact on people and our planet
• bluesign® Approved 400D Nylon with TPU Coating and C0 DWR / bluesign® Approved 900D Plain Weave Polyester with C0 DWR and PU Coating

Crab Grab Mini Shark Teeth

SMALL PAD. BIG BITE.
This is the mini version of our best selling spiky traction. Same size teeth (just fewer of them) for those who want maximum grip for minimum dough.

* 1 per pack
* 12 Spikes
* Dimensions: 2.9” x 3.7”

TECHNOLOGIES:
* SHARK TOOTH SPIKES™ - Ovular spikes modeled after nature’s best bite.
* CRUBBER™ - Our flexible rubbery replacement to the stomp pads of yesteryear.
* EASY CUT GROOVES™ - Flex with your board to let it bend naturally, and easy to cut and spread out your spikes.

TNT Collector’s Edition Board Wall Mounts
Burton Part Number: 135031

Turn your walls into a snowboard museum.

Additional Features:

• Three-Point Mounting System Fits Any Snowboard
• Brushed Aluminum Base
• Mounts to Any Flat Surface
• Mounting Hardware and Instructions Included

 

Save: 20% Off!

2025 Men's Burton Custom Camber Snowboard - 106881

Product Features

Poppy, Versatile, and Fun

From its humble beginnings, innovation has defined the Burton Custom Snowboard series and set it apart as the most popular, versatile, and mimicked board in snowboarding. Since 1996, this icon has reigned supreme while constantly evolving with a proven formula that combines time-honored design with next-gen ingredients to create a lightweight, poppy, and highly versatile board. When it comes to stability and precision, the Custom Camber is the top choice for many Burton pro riders.

Terrain

All Mountain & Freeride

Rider's ability

Intermediate-Advanced

Rocker Type

Camber

• A Camber Bend advocates powerful turns and poppy precision, offering snappy suspension with weight distributed evenly across the entire board for smooth, continuous edge control from tip to tail

Rocker Profile

(Camber)

Flex

Medium

Flex Rating

6 out of 10 (1 Soft - 10 Stiff)

Shape

Directional Twin

• Classic Directional Shape , A twin flex balances the directional shape for an all-terrain ride that you can ride regular or switch.
• Directional Shape is designed to be ridden with a slightly longer nose than tail to concentrate pop in the tail while providing plenty of float, flow, and control to rip any terrain or condition.
• Twin Shape is perfectly symmetrical for a balanced ride so you can spin and stomp with outstanding stability whether you're riding regular or switch

Taper

0

Core

Super Fly II™ 700G Core with Dualzone™ EGD™

• Super Fly II™ 700G Core – Stronger and lighter woods target specific areas of the core to provide pop, strength, and reduced weight.
• Dualzone™ EGD™ – The wood grain is positioned along the toe and heel edges on two continuous zones, perpendicular to the rest of the wood core for consistent edge-hold and added strength

Laminates

45° Carbon Highlights

• Carbon Highlights optimizes each layer of the fiberglass matrix and adds a full tip-to-tail carbon layer to reduce weight and fine tune torsional feel to achieve different ride characteristics. A 60° fiber angle creates a highly maneuverable and playful feel, while a 45° fiber angle provides a more aggressive ride.

Base

Sintered WFO

• Infusing a specially formulated wax deep into the pores of this extra-absorbent, high-density sintered material results in an ultra-durable base that stays wide open all season and in any condition.

Edges

Frostbite Edges

• Frostbite edges extend out slightly from the sidewall of the board for added bite when you need it and a smooth and buttery ride when you don't.

Additional Features

Pro-Tip™

• Burton boards with “pro-tip” have a tapered tip and tail thickness. This reduces swing weight and therefore improves maneuverability along with overall board feel.

Infinite Ride™

• This Burton-exclusive technology allows maximized pop and strength by overbuilding the board, then putting it in a machine that breaks in the board for you. Whether you choose to ride Flat Top, Flying V™, or Camber, rest assured that with Infinite Ride™ your board will maintain its flex, pop, and feel from the first day forward, season after season.

Super Sap® Epoxy

• A resin formulated with bio-based materials that reduces the carbon footprint by 50% over conventional all-petroleum-based epoxies. Less oil consumption means even less of a carbon footprint per board

Factory Tuned

• Board comes waxed and ready for the mountain right from the factory.

Warranty

3-YEAR WARRANTY

• All 2014 and newer Burton snowboards with The Channel mounting system (such as the one you are looking at here) are backed by a three-year warranty from date of purchase.

Binding Compatibility

The Channel®

• Board Mount is compatible with all major bindings and lets you dial in the stance exactly the way you like it.

Channel Inserts Included 

• Channel Inserts are required to mount your bindings. Inspect packaging before recycling the box.

Grabber Cold Weather Foot Warmers

This non-toxic, environmentally friendly, odorless heat source uses all-natural ingredients that are non-combustible. Built to warm your entire foot, the Grabber Foot Warmer is designed in the shape of a shoe or boot insert.

HOW TO USE COLD WEATHER FOOT WARMERS:

Simply open the outer package and immediately place both insoles into any pair of closed-toe shoes, winter boots, Ski Boots or Snowboard Boots. Foot Warmers are specifically designed for use inside a shoe or boot where oxygen is restricted. Do not use in ventilated type footwear. For best results, insert each insole forward towards the toe of the shoe or boot. No trimming. No peeling. Fabric side up, white side down.

SIZING:

S/M: Women Shoe size 5-8 / Men Shoe size 4-7

M/L: Women Shoe size 9+ / Men Shoe size 8+

OTHER INFO:

Avg. temp. 95F (35C), max. temp. 102F (39C) when used as directed. Each package contains 2 Warmers.

Save: 20% Off!

Men's Burton Weekend Midweight Socks (2 Pack) - 149261

It's the Little Things, Like Warm, Dry Socks

Who doesn't appreciate a warm, comfy pair of socks? We're talking made-in-Italy goodness for keeping your feet warm, and dry, and riding longer. The men's Burton Weekend Midweight Socks 2-Pack packs twice the goodness into one package, so you can ride with fresh socks on Saturday and Sunday.

• Made for Riding: Reinforced in all the right places with elastic arch support and stretch to keep them in place, no matter what you're up to.
• Warranty: Lifetime Warranty
• Part #: 149261